How to Conduct a Workplace First Aid Needs Assessment

Quick Summary

A workplace first aid needs assessment is a structured review of hazards, headcount, shift patterns and work locations that shows how many first aiders you need and where equipment should be kept. Start by rating hazards as high, medium or low risk, then map where and when your staff work. Score each site on risk, people on site and response time to set a starting target.

  • Rate each hazard as high, medium or low risk and note the likely injuries.
  • Count employees, visitors and contractors by location and shift.
  • Score each site on risk level, people on site at peak and response time.
  • Check cover shift by shift, not only across the whole organisation.
  • Record your decisions, who approved them, and a date for the next review.

Table of Contents

How to Conduct a Workplace First Aid Needs Assessment

Last Updated: October 28, 2026

What a Workplace First Aid Needs Assessment Is For

A workplace first aid needs assessment is a structured review of what your staff need if someone is injured or becomes unwell at work. It tells you how many first aiders you need, what equipment to keep, and where to keep it.

Many employers skip this step and buy a standard first aid kit. That approach often leaves gaps. A warehouse with forklifts has different needs from a quiet office, and a site with shift work needs cover at night, not just during the day.

The assessment can help you work out what first aid arrangements are appropriate for your premises. It can also provide a record of your decisions.

Keep the assessment short and practical. Write down what you find, what you decide, and when you will check again.

Step 1: Review Workplace Hazards and Risk Levels

Start by listing the hazards in your workplace. Look at the work itself, the tools and substances used, and the places where people work.

Rate each hazard as high, medium or low risk. A simple rating works well:

  • High risk: Work at height, machinery, confined spaces, hazardous substances
  • Medium risk: Manual handling, driving at work, working with hot or sharp tools
  • Low risk: Office work, light cleaning, sedentary tasks

Next, think about the likely injuries. A cut, a burn, a fall or a sudden illness each need a different response. Your list should show which injuries are most likely and which could be most serious.

Check your accident and incident records too. Past events often show patterns that a walk-through misses.

Watch out: Do not rate hazards only on how they look today. Include the tasks people do when a machine is being serviced or when the site is busy.

Step 2: Map Workforce Size, Shift Patterns and Work Locations

Next, count your people and map where they are. Include employees, visitors, contractors and any lone workers.

Site supervisor and employee reviewing staff areas for a first aid needs assessment while walking through a warehouse
Site supervisor and employee reviewing staff areas for a first aid needs assessment while walking through a warehouse

Record:

  • Total headcount and how many people are on site at each time
  • Shift patterns, including nights, weekends and overtime
  • Each work location, floor, building or external site
  • How far each location is from the nearest first aid kit or trained first aider

This step matters most when staff work across several sites, in hybrid arrangements or alone. A first aider in the main office does little good for a remote worker on the other side of the country. Note where cover is thin and plan for it.

Walk through each area yourself. You will spot access problems, such as locked cabinets or unclear signs, that a desk review will not reveal.

How Many First Aiders Are Needed in the Workplace

The number of first aiders needed depends on the circumstances of each workplace (First Aid FAQ Responses). A documented method can help explain how you reached your decision. For a deeper look at staffing numbers, see how many first aiders are needed in a workplace.

Use a simple scoring matrix

Score each site or work area on three factors, then use the total to set a starting target. Adjust the target upward where the matrix understates risk.

Factor 1 point 2 points 3 points
Risk level Low (office, light duties) Medium (manual handling, driving, hot or sharp tools) High (work at height, machinery, confined spaces, hazardous substances)
People on site at peak 1-25 26-100 Over 100
Response time to nearest A&E Under 30 minutes 30-60 minutes Over 60 minutes or remote

Add the three scores for each site:

  • 3-4 points: a minimum of one trained first aider per shift, with at least one more trained as backup.
  • 5-6 points: at least two trained first aiders per shift, plus a designated first aid room or quiet area.
  • 7-9 points: at least three trained first aiders per shift, a defibrillator on site, and a written emergency plan tested with staff.

These are starting points, not legal maxima or minima. Increase the number where you have lone workers, visitors, contractors, members of the public, or staff with known medical conditions. Decrease only where you can show cover is genuinely adequate, and record why.

Check cover shift by shift

A common mistake is to count first aiders across the whole organisation rather than per shift. If you have 80 staff on two shifts and two trained first aiders, both on days, the night shift has no cover. Build a simple rota that shows, for each shift and each location, who is trained, when their certificate expires, and who covers holidays and sickness.

Consider how annual leave, illness or a resignation could affect cover while replacement training is arranged.

Account for lone and remote workers

For each lone worker, record how they summon help, how long help takes to reach them, and what first aid equipment they carry.

Watch Out Keep your scoring sheet, your rota and your training records together to document how you reached the number.

Document the decision

For each site, record the three scores, the resulting target, any adjustments and the reason for them, and who approved the assessment. That record documents the reasoning behind the decision.

Workplace First Aid Needs Assessment Checklist and Template

Use this checklist to record your findings. Copy it into a document and fill it in for each site.

Get Started Today →

  • List all hazards and rate each as high, medium or low risk
  • Note the likely injuries for each hazard
  • Count employees, visitors and contractors by location
  • Record shift patterns, including night and weekend work
  • Identify lone workers and remote workers
  • Check distance from each work area to first aid equipment
  • Confirm the number of first aiders needed per shift
  • Check the first aid kit contents against your risk list
  • Note any accident or incident trends
  • Record your decisions and who approved them
  • Set a date for the next review

Here is a short template for each site:

Site: ______________ Date: ______________ Highest risks: ______________ Headcount and shifts: ______________ First aiders needed per shift: ______________ Equipment and location: ______________ Actions to take: ______________ Owner and deadline: ______________

Workplace First Aid Provision Examples

The three worked examples below show a chain from findings to scoring, decisions and records. Use them as a pattern, not as ready-made answers.

Example 1: Small office, 25 staff, single shift

Evidence gathered: Low-risk office work; one floor; nearest A&E about 20 minutes away; no serious incidents in three years; two staff volunteer as first aiders.

Scoring: Risk 1 + people 1 + response 1 = 3 points.

Decision: One trained first aider per shift as the minimum, with a second trained as backup. A stocked kit in the kitchen area and a smaller kit in the stationery cupboard. A signed and dated notice at reception showing the first aider's name and the kit location.

Recorded: Scoring sheet, first aider rota, kit checklist, review date 12 months out.

Example 2: Manufacturing site, 80 staff, two shifts

Evidence gathered: Machinery, manual handling and forklift movements; two buildings linked by an outdoor walkway; night shift of 20; two serious incidents in two years, both hand injuries; nearest A&E about 35 minutes away.

Scoring: Risk 3 + people 2 + response 2 = 7 points.

Decision: Three trained first aiders per shift, with one extra trained as cover. A defibrillator at the main entrance. A larger kit at the production line and a second kit in the night-shift rest area. A written emergency plan tested twice a year. Hand-injury-specific supplies added after reviewing incident data.

Recorded: Scoring sheet, shift rota with certificate expiry dates, incident review notes, defibrillator check log, review date six months out and after any serious incident.

Example 3: Field engineers working alone across the country

Evidence gathered: Eight engineers, each driving to customer sites; no fixed first aider nearby; one engineer had a fall on a customer site last year; mobile signal patchy in some areas.

Scoring: Risk 2 + people 1 + response 3 = 6 points, but the lone-working factor pushes the practical need higher.

Decision: First aid training for every engineer, a personal kit in each vehicle, a check-in procedure with a nominated contact, and a written lone-worker plan. A defibrillator is not practical in each vehicle, so the plan sets out how to access the nearest public device and how to direct emergency services to the engineer's location.

Recorded: Lone-worker plan, vehicle kit checklist, training records, check-in log, review date 12 months out and after any change in territory or staffing.

Pro Tip Notice the pattern across all three: gather evidence, score it, adjust for lone working or response time, decide, then record. If you can show that chain for each site, you have a defensible assessment even where the final numbers differ from someone else's.

These examples are illustrative. Your own hazards, response times and staffing will produce different results.

Scheduling Your Next Review and Booking Training

Set a review date when you finish the assessment. Consider reviewing it when something changes, such as a new site, a change in work activities, a serious incident, or staff joining or leaving in large numbers.

Once the assessment shows what you need, arrange training for the people who will fill those roles. FIRST AID SAFELY offers general, paediatric and sports first aid courses, delivered by a qualified PHECC instructor and examiner, with blended learning options available.

Keep a training record for each person, including course dates and renewal dates. Certificates expire, and a lapsed certificate leaves a gap in your cover.

Ready to build your plan? Contact FIRST AID SAFELY about training for your team.

Frequently Asked Questions

What are the 5 responsibilities of a first aider?

A workplace assessment can consider whether nominated first aiders have the time and training needed for their roles.

How many first aiders does a workplace need?

The number of first aiders needed depends on the circumstances of each workplace. Factors to consider include hazards, workforce size, shift patterns, work locations and access to first aid cover. Record the reasoning behind your decision.

How often should a workplace first aid needs assessment be reviewed?

Consider reviewing the assessment when circumstances change, such as a new process or hazard, changes in staffing or shift patterns, a move to a new site, changes to lone or remote working, a significant incident, or a first aider leaving.

What should a workplace first aid needs assessment checklist include?

A checklist can cover the nature of the work and its hazards, the number and profile of employees, visitors and contractors, shift patterns and working hours, the layout and location of each site, first aiders, first aid kits and equipment, lone and remote workers, accident and incident history, and access to help.

Comments

Popular posts from this blog

First Aid Training Courses

QQI Level 6 Manual Handling Training Explained

What CPR Instructor Qualifications Should Include